QFS 850 Cross-cutting Veneer Clipper

For quick and neat cutting to length of veneer packs. Tear-out-free cutting is assured by the powerful, vertical operation of the knife. An excellent view of the veneer and cutting area is made possible by the narrow construction. The picture shows the machine with the bezel of the knife on the right for working from left to right. On request the machine is available turned through 180° with the knife bezel on the left.

A green light beam clearly indicates the cutting line. Lengths are indicated on 2 measuring tapes. The pressure bar is lowered at the same time as the knife. Quick and powerful operation of the knife is assured by a brake motor, gear unit and crank drive. The cut is actuated by a two-hand pushbutton control.
Control operations can be performed directly adjacent to the cutting area on the right or left-hand side.

If you need an angular arrangement on the right or left-hand side of a longitudinal veneer jointing guillotine or on both sides, we will design the work tables accordingly.

The machine is equipped with a safety-orientated electric control system, a Plexiglas guard and plug-in type angular stops.

Also available on request: Work tables of greater lengths with intermediate supports and length stops.

This special machine promises you high performance, minimum maintenance and optimum veneer cuts.

qfs2_small. qfs_850_3_small.jpg qfs_850_schema_3small.
QFS 850 Cross-cutting
Veneer Clipper
QFS 850 A
QFS 850 W

pdficon2.png QFS 850 Cross-cutting Veneer Clipper Brochure

Type Data QFS 850, QFS 850 W

Veneer cutting